Dial Gauge, Flat Back, ISO Type Jewelled Bearing, Shockproof, 1mm, 0,001mm 2110AB-10 Manual Test Stand A Mitutoyo vernier caliper equipped

A Mitutoyo vernier caliper equipped with a fine-adjustment wheel and standard outside and inside jaws

Handles are included with Mark-10 ergonomics testing kits

USBDIN 863-4Measuring range mm 12 - 20 mm mmResolution mm/inch 0

Offset revision

The Standard Detector for the Mitutoyo Surface Roughness Tester models SJ-210 & SJ-310 has a measuring tip that is about 2

Dial Gauge, Flat Back, ISO Type Jewelled Bearing, Shockproof, 1mm, 0,001mm 2110AB-10 Manual Test Stand A Mitutoyo vernier caliper equippedStandard Type, 1 mm Range, 0,001 mm Graduation This is a standard dial indicator. It offers you the following benefits: Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed and removed without tools. No through screw holes on the frame and secure adhesion between the bezel and the crystal as well as the use of an O ring prevents water or oil penetration. Specification Digital Analog: