FITTING, ADAPTER, 1/2" NPT MALE, BRASS, FOR MECH.TEMP. GAUGE Weld-On Fittings Each cold air intake model

Each cold air intake model has been designed and dyno tested at the BBK headquarters in Southern California to maximize performance

the cataloged offerings are summarized as follows: Rebound: “B”: Baseline digressive valving “F”: Firm digressive valving Double Adjustable Compression: “A”: Baseline digressive valving “G”: Firm digressive valving with a fixed low-speed bleed “H”: Firm digressive valving Triple Adjustable Compression: “A”: Baseline digressive valving “H”: Firm digressive valving “R”: Extreme firm digressive valving The following combinations will be offered as standard for the Berserker Series: Double Adjustable: “AB”: Baseline Valving “GF”: Handling applications “HB”: High force compression with baseline rebound “HF”: High force compression with tie-down rebound Triple Adjustable: “AB”: Baseline valving “HF”: Handling Applications “RB”: High force compression with baseline rebound “RF”: High force compression with tie-down rebound

For all aftermarket versions like Baker

Use only with Russell ProClassic hose for best results

BMR Suspensions SB764 front sway bar kit was designed by factoring in the vehicle weight

FITTING, ADAPTER, 1/2" NPT MALE, BRASS, FOR MECH.TEMP. GAUGE Weld-On Fittings Each cold air intake model5 8" 18 UNF Female (adapts directly to sealing nut on AutoMeter Mechanical Temp Gauges) to 1 2 1 16" NPT Male