Autonics Photoelectric Sensor, Photoelectric Type BRQPS10M-TDTA-C Stroke_141^110mm Angular contact ball bearings are

Angular contact ball bearings are non-separable bearings with a defined contact angle in the radial direction relative to the straight line that runs through the point where each ball makes contact with the inner and outer rings (see Fig

3307 in 110

Screw Driver Bit Handle 150mm Hammers 300g Screwdriver Bit Assortments 25mm 20Pieces

Light and easy to use

Specification item model symbol Specification information built-in magnet D built-in magnet installation support B Basic type tube inner diameter 20 tube inner diameter 20mm cylinder stroke 5 cylinder stroke 5mm option - Standard (rod end female thread) auto switch - Without auto switch Auto switch additional symbol - 2 with or without Custom made specifications - standard

Autonics Photoelectric Sensor, Photoelectric Type BRQPS10M-TDTA-C Stroke_141^110mm Angular contact ball bearings areSensing type Through beam type Sensing distance 10m Sensing target Opaque material of min. 7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Emitter Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: